DESCRIPTION:
Shoe Goo is water resistant immediately upon application. Apply Shoe Goo directly to the surface to be sealed. Use thin coats of Shoe Goo to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces...such as plastic, glass, or ceramic. Shoe Goo hardens by solvent evaporation...so allow time for thorough hardening to ensure proper bonding and wear resistance.
Repairing worn soles: If a worn shoe has a hole that goes all the way through the sole, tape over the hole inside the shoe before applying Shoe Goo to the outer sole. This will help avoid creating a bump. The tape should be removed from the inside and all bumps smoothed out within 2 hours...before the glue is completely hard.
